NavCom SF-2040 Rev.C - Manual (Page 101)

LAND-PAK™ User Guide – Rev. C
5-97
Refer o Figure 60 for the steps below:
7. Ta the Options tab.
t
p
Fig ptions Tab
Check only the options listed below. De-select all
er options.
u
8.
h
•
n of the measurements.
• Use Code Table for Descriptions: Refer to the
Carlson SurvCE manual for instructions. This
option is useful for assignment of attributes
and controlling how features are plotted.
‡
Check the Use Control File option to
access points in a file imported to the
Explorer 600+ controller to support the
job. The Select File button becomes
active. Tap the button. The Coordinate
Files window opens. Select the
re 60: Job Settings Submenu – O
ot
• Time Stamp Each Point: Saves a date/time
stamp in the raw data file (*.rw5).
Store GPS Accuracy in Raw File: Saves the
horizontal and vertical RMS in the raw file and
in the note field. This data provides a record of
the precisio
necessary control file.