NavCom SF-2040 Rev.C - Manual (Page 31)

LAND-PAK™ User Guide – Rev. C
„ Operation
9
Power Off: Press and hold the power button for
approximately 10 seconds. This action terminates
active applications, and ceases serial port
operations.
9
Suspend Mode: Press and immediately release
the power button. The display turns off, but active
applications are not shut down (except serial port
operations). To exit suspend mode, press and
release the power button. The display turns on,
suspended applications resume running, but
serial port operations must be restarted. Use
suspend mode to conserve battery power.
9
Warm Re-Boot: In Windows CE, select Start >
Programs > Tools > Warm Re-Boot.
SurvCE Software
Carlson SurvCE is a complete data collection system
for Real Time (RTK) GPS.
‡
Refer to Chapter 5 SurvCE Software
Operation for a quick start setup and
operation of SurvCE. Refer to the
supplied Carlson SurvCE manual for
details not covered in this guide.
„ SurvCE
Upgrade
‡
Contact NavCom Technology prior to
upgrading the factory installed version
of SurvCE on the Explorer 600+. If
appropriate, download the latest
version of Carlson SurvCE from the
Carlson web site at
http://www.carlsonsw.com .
To install SurvCE on the Explorer 600+, a PC requires
Microsoft ActiveSync on Windows XP or earlier, or the
2-27