NavCom SF-2040 Rev.C User Manual
Page 146
LAND-PAK™ User Guide – Rev. C
6-142
Thi
9
9
e X-Port to print and/or save each file
Set up the Explorer 600+ and PC for file transfer
s exercise provides steps to:
Transfer a *.crd and a *.rw5 file from the Expl
60 + to the PC
orer
0
r
with the transferred *.crd file.
b. Select the *.crd file. The coordinates in the file
are displayed in the lower half of X-Port.
c. Select
File > Print > Coordinates. The Print
Coordinates window opens (see Figure 107).
Us
to a text
file
1.
.
Refer to Exercise 2, Steps 1 to 7 for details.
2. Using SurvCom, transfer a *.crd file and a *.rw5
file from the Explorer 600+ to the PC:
a. In the left panel (Local PC), open the
C:\Program Files\Carlson X-Port
it is not already open.
\Data folder, if
b. In the right panel (Remote), browse to and
select the *.crd file and *.rw5 file to transfe
from the Explorer 600+ to the PC.
c. Click
the
Transfer button.
d. Verify the files appear in the Data folder.
3. Exit SurvCom.
Run
X-Port.
Perform the following ste
4.
5.
ps to print and/or save
the CRD File:
a. Select
File > Open CRD File. A window opens