NavCom SF-2040 Rev.C - Manual (Page 110)

LAND-PAK™ User Guide – Rev. C
5-106
base has not been operating for
several minutes with the GPS LED
illuminated green, it is recommended
to continue collecting data for one
minute or more. This will result in a
seed position for the base usually
better than 10 feet. If the WAAS
correction is being received the
position will
etter than 3
feet. If a Starfire correction is being
received the position will approach 0.3
feet after 30-45 minutes. When
.
usually be b
working in a local coordinate system
(not SPC) it is not necessary to kn
the precise geodetic position.
ow
16 Tap to accept the settings. An average of the
number of positions is taken. The Base
C nfiguration window opens to display the
ition (see Figure 71).
o
pos
Figure 71: Base Configuration Window
Tap the Yes button to continue with the base
setup. Tap the No button to return to the previ
17.
ous
screen to change the number of autonomous
navigation solutions to be averaged at the base
receiver.