NavCom SF-2040 Rev.C - Manual (Page 74)

LAND-PAK™ User Guide – Rev. C
4-70
3. Press the down arrow soft key to move the curso
to the next setting on the submenu. It is for the
currently set baud rate (see Figure 29).
r
Figure 29: Baud Rate Setting
soft key to change the baud
rate. A submenu appears with a list of baud rates.
5. Press the down arrow soft key to move the cursor
to 38400 bit/s (see Figure 30).
4. Press the Change
Figure 30: Baud Rate Setting Change
6. Press the Set soft key to set the baud rate to
38400 bit/s. The previous submenu returns with
38400 bit/s listed as the current baud rate.
‡
The SF-2040 GPS sensors’ RTK
corrections com port will be configured
to the same baud rate (see Figure 67).
7. Press the Back soft key once to return to the main
menu.
8. Continue to the next section.