Figure 119: local point window, Figure 120: base station file window – NavCom SF-2040 Rev.C User Manual
Page 170
Advertising
LAND-PAK™ User Guide – Rev. C
B-166
Figure 119: Local Point Window
Tap
to accept the settings. The Localization File
ile to facilitate
Tap the Read From File button (see Figure 117) to
select a previously stored position in a *.ref file. The
Base Station File window opens (see Figure 120).
A *.ref file usually is selected to
continue working on a project.
window opens. Select a localization f
the computation of a WGS84 (GPS) coordinate from
the local coordinate. The Localization file is a
transformation solution previously determined for a
project.
Read From File
Figure 120: Base Station File Window
Advertising