NavCom SF-2040 Rev.C - Manual (Page 72)

LAND-PAK™ User Guide – Rev. C
4-68
maximum discharge on the battery. Select a
lower setting for surveys over small areas.
• 3ASd 869 radio modem (the LAND-PAK 869
configuration): The RF power output options
are from 10 mW to 500 mW.
6. nu.
Perform this setting only on the rover radio modem. If
the base station radio modem is being configured, go
to the section below, Serial Port Settings.
Press the down arrow soft key to move the cursor
e
5. Press the ower output.
The display
cursor at TX level.
Press the Back soft key to return to the main me
Continue to the next section.
Signal Threshold
Set soft key to set the RF p
returns to the submenu with the
1.
dow n the main menu to Radio settings (se
Figure 26).
Figure 26: Main Menu – Radio Settings
ss the Select soft key to select Radio setting 2. e . Pr s
A submenu is displayed with the cursor at the
op ion, TX level (see Figure 27).
t
Figure 27: Sig. Threshold option