NavCom SF-2040 Rev.C - Manual (Page 124)

LAND-PAK™ User Guide – Rev. C
5-120
job. The Configure submenu opens (see Figure
86).
‡
The Sets tab is not applicable to GPS.
The Receiver and RTK tabs are
provided on the
as a convenience. They are the same
as the Receiver
described in
GPS Rover
Configure submenu
and RTK tabs
the GPS Base Setup and
Setup sections above.
Figure 86: Configure Submenu – General Tab
Refer to Figure 86 for the step below:
2. Check only the options listed below. De-select all
other options.
• Store Fixed Only (GPS): Assures a centimeter
position. Only data gathered in the Fixed
(locked) status will be stored to the point file. If
an attempt is made to store data when the
receiver is not fixed, this message appears:
Position is not fixed! Continue storing? Select
• Prompt for Height & Description: Activates a
window to open after each shot to enter the
target height and description.
Yes, No, or Store when fixed.