NavCom SF-2040 Rev.C - Manual (Page 81)

LAND-PAK™ User Guide – Rev. C
4-77
‡
OPTIONAL STEP: Screw the pole
extension into the tribrach adapter. The
pole extension provides easier access to
the connectors and exchange of the
batteries on the SF-2040 GIS PM Sensor.
The pole extension is in the base bag.
Figure 38: Mounting the Radio Antenna Bracket
Refer to Figure 38 for the steps below:
8. Mount the radio antenna bracket to the tripod:
a. Unscrew the rear knob of the bracket and
remove the rear plate.
b. Place the bracket against the opening on a
tripod leg.
‡
Do not mount the bracket to the tripod
leg on which the shoulder strap is
attached.
c. At the back of the tripod leg, place the rear
plate through the bracket screw.