NavCom SF-2040 Rev.C - Manual (Page 134)

LAND-PAK™ User Guide – Rev. C
„ Stake
Points
Figure 99: Stake Points Window
Refer to Figure 99 for the settings below.
Methods to select a point to stake:
9
Enter the point number in the Point ID field. Press
the Enter button on the
view the elevation, northing and easting.
‡
A range of points can be staked out.
For example, 3-10, 2,15-20 entered
into the Point ID field would stake out
sequentially.
9
Open the job file or control file. Tap the
Explorer 600+ keyboard to
the points from 3-10 sequentially, then
point 2, then 15 through 20
button
to select one or more points from the Point Details
window.
9
Tap the button to open the graphical view.
Tap on a point to stake.
The remaining options on the Stake Points window
are described below:
• Add To List and Pick From List buttons: Create a
list of points to be staked. Tap the Add to List
5-130