NavCom SF-2040 Rev.C - Manual (Page 66)

LAND-PAK™ User Guide – Rev. C
4-62
Operating Modes
ansfer mode by
default. Prog
radio modem
„ Dat Tra
In data trans wer-up,
the LCD display shows the operating settings of the
radio modem, signal strength, and battery status (see
Figure 17).
The radio modems operate in data tr
ramming mode is used to configure the
s.
nsfer Mode
fer mode, which appears at po
a
Figure 17: LCD Display – Data Transfer Mode
„ Programming
Mode
Programming mode is accessed from the data
transfer mode screen. Press the Setup soft key. The
programming mode main menu opens (see Figure
18). The cursor “>” indicates the active option.
Figure 18: LCD Display – Programming Mode