Assign a base position, Figure 69: from new position options, Figure 70: average gps window – NavCom SF-2040 Rev.C User Manual
Page 109
Advertising
LAND-PAK™ User Guide – Rev. C
5-105
Assign a Base Position
Figure 69: From New Position Options
14. Tap the Read From GPS button. The Average
GPS
window open
s (see Figure 70).
m GPS option is often
used on a new project using a local
coordinate system.
The Read Fro
Figure 70: Average GPS Window
Enter the number of autonomous navigation
15.
solutions to be averaged at the base receiver.
A navigation solution is basically a
resection from the satellites. If the
Advertising