Snmpv1/v2c configuration example, Network requirements, Configuring the agent – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 123
Advertising
110
Figure 93 SNMP packet statistics
SNMPv1/v2c configuration example
Network requirements
The NMS connects to the agent, a switch, through an Ethernet. The IP address of the NMS is 1.1.1.2/24.
The IP address of the VLAN interface on the switch is 1.1.1.1/24. Configure SNMP to achieve the
following purposes.
•
The NMS monitors the agent by using SNMPv1 or SNMPv2c.
•
The agent reports errors or faults to the NMS.
Figure 94 Network diagram
Configuring the agent
1.
Enable SNMP agent.
a.
Select Device > SNMP from the navigation tree.
The Setup page appears.
Advertising