As shown in, Figure 390 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 406
Advertising
393
Figure 390 Create an ACL
2.
Configure an ACL rule to permit Host B:
a.
Click the Basic Setup tab.
b.
To configure an ACL rule to permit Host B:
{
Select 2001 from the Select Access Control List (ACL) list.
{
Select Permit from the Operation list.
{
Select the Source IP Address box and then type 10.1.1.3.
{
Type 0.0.0.0 in the Source Wildcard field.
c.
Click Add.
Figure 391 Configure an ACL rule to permit Host B
Advertising