Configuring switch b, Configuration guidelines – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 145
Advertising
132
Figure 121 Assign GigabitEthernet 1/0/1 to VLAN 2 and to VLANs 6 through 50 as a tagged member
Configuring Switch B
Configure Switch B as you configure Switch A.
Configuration guidelines
When you configure VLAN, follow these guidelines:
•
VLAN 1 is the default VLAN, which can be neither created nor removed manually.
•
Some VLANs are reserved for some special purposes. You can neither create nor remove them
manually.
•
Dynamic VLANs cannot be removed on the page for removing VLANs.
Advertising