Configuring voice vlan globally, Configuring voice vlan, Globally – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 153
140
Recommended configuration procedure for configuring voice VLAN on a port working in manual voice
VLAN assignment mode
Step Remarks
Optional
Configure the voice VLAN to operate in security mode and configure the aging
timer.
2.
Assigning the port to the
voice VLAN
Required
After an access port is assigned to the voice VLAN, the voice VLAN
automatically becomes the default VLAN of the access port.
For more information, see the chapter "
3.
Configuring the voice
VLAN as the default
VLAN of a hybrid or
trunk port
Optional
This task is required if the incoming voice traffic is untagged and the link type
of the receiving port is trunk or hybrid. If the incoming voice traffic is tagged,
do not perform this task.
For more information, see the chapter "
."
Required
Configure the voice VLAN assignment mode of a port as manual and enable
voice VLAN on the port.
By default, the voice VLAN assignment mode of a port is automatic, and voice
VLAN is disabled on a port.
Optional
You can configure up to 16 OUI addresses.
By default, the system is configured with the seven OUI addresses.
Configuring voice VLAN globally
1.
Select Network > Voice VLAN from the navigation tree.
2.
Click the Setup tab to enter the page shown in
Figure 124 Configure voice VLAN
3.
Configure the voice VLAN as described in
4.
Click Apply.