H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 195
Advertising
182
Approach 1: Creating a static link aggregation group
1.
Create static link aggregation group 1:
a.
Select Network > Link Aggregation from the navigation tree.
b.
Click the Create tab.
c.
To configure static link aggregation group 1:
{
Set the link aggregation interface ID to 1.
{
Select the Static (LACP Disabled) option for the aggregate interface type.
{
Select GE1/0/1, GE1/0/2, and GE1/0/3 on the chassis front panel.
d.
Click Apply.
Figure 163 Create static link aggregation group 1
Approach 2: Creating a dynamic link aggregation group
1.
Create dynamic link aggregation group 1:
a.
Select Network > Link Aggregation from the navigation tree.
b.
Click the Create tab.
c.
To configure dynamic link aggregation group 1:
Advertising