H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 174)

161
Figure 148 MST region
2. Click Modify to enter the page for configuring MST regions, as shown in Figure 149 .
Figure 149 Configure an MST region
3. Configure the MSTP region information as described in Table 51 .
4. Click Activate.
Table 51 Configuration items
Item Description
Region Name
MST region name
The MST region name is the bridge MAC address of the device by default.
Revision Level Revision level of the MST region
Manual
Instance ID
Manually add VLAN-to-MSTI mappings. Click Apply to add the
VLAN-to-MSTI mapping entries to the list below.
VLAN ID
Modulo Modulo Value
The device automatically maps 4094 VLANs to the corresponding MSTIs
based on the modulo value.