H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 366)

353
Item Description
Primary Server Status
Set the status of the primary server, including:
• active: The server is working normally.
• blocked: The server is down.
If the IP address of the primary server is not specified or the specified IP address
is to be removed, the status is blocked.
Secondary Server IP
Specify the IP address of the secondary server.
If no secondary server is specified, the box displays 0.0.0.0.
To remove the previously configured secondary server, enter 0.0.0.0 in the box.
The specified IP address of the secondary server cannot be the same as that of
the primary server.
Secondary Server UDP Port
Specify the UDP port of the secondary server.
If the IP address of the secondary server is not specified or the specified IP
address is to be removed, the port number is 1812 for authentication or 1813
for accounting.
Secondary Server Status
Status of the secondary server, including:
• active: The server is working normally.
• blocked: The server is down.
If the IP address of the secondary server is not specified or the specified IP
address is to be removed, the status is blocked.
Configuring RADIUS parameters
1. From the navigation tree, select Authentication > RADIUS.
2. Click the RADIUS Setup tab to enter the RADIUS parameter configuration page.