H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 222)

209
Figure 185 The page for configuring the voice VLAN function on ports
4. Enable LLDP on ports GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2. If LLDP is enabled (the
default), skip this step.
5. Set both the LLDP operating mode and the CDP operating mode to TxRx on ports GigabitEthernet
1/0/1 and GigabitEthernet 1/0/2:
a. Select Network > LLDP from the navigation tree to enter the Port Setup tab.
b. Select port GigabitEthernet1/0/1 and GigabitEthernet1/0/2.
c. Click Modify Selected, as shown in Figure 186 .