H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 18)

5
Access controller engine
Overview
The H3C WX3000E series access controller engine and switching engine are developed based on the
Open Application Architecture (OAA). You can log in to the access controller engine through the console
port on the device and you can redirect to the operating system of the switching engine through OAP. The
terminal display interface will be switched from the command line interface on the access controller
engine to the operating interface of the operating system of the switching engine. You can then manage
the system and application software on the switching engine. To return to the command line interface (CLI)
on the access controller engine, press Ctrl+K.
The access controller engine and switching engine are integrated to work as one device. From the
perspective of an SNMP UDP domain-based Network Management System (NMS), however, the access
controller engine and switching engine are separate SNMP agents. They have different software systems
and manage their own MIB objects. To access an SNMP agent, the NMS must get the IP address of the
management interface on the agent.
By default, both the access controller engine and switching engine are configured with a management
IP address.
Follow these steps to specify the management IP address for the switching engine:
To do… Use the command… Remarks
Enter system view system-view —
Specify the management IP
address for the switching engine oap management-ip ip-address
slot 0
Required
By default, the management IP
address of the switching engine is
192.168.0.101.
Return to user view quit Required
Log in to the switching engine from
the access controller engine
through OAP
oap connect slot 0
Required
Available in user view
Return to system view system-view —
Specify the management IP
address for the access controller
engine
oap management-ip ip-address
slot 1
Required
By default, the management IP
address of the access controller
engine is 192.168.0.100.