H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 256)

243
Figure 218 Configure a static route
e. Perform the following settings:
{
Type 1.1.3.0 for Destination IP Address.
{
Type 24 for Mask.
{
Type 1.1.5.6 for Next Hop.
f. Click Apply.
3. Configure a default route to Switch B on Switch C:
a. After you log in to the Web interface of Switch C, select Network > IPv4 Routing from the
navigation tree.
b. Click the Create tab.
c. To configure a default route to Switch B on Switch C:
{
Type 0.0.0.0 for Destination IP Address.
{
Type 0 for Mask.
{
Type 1.1.5.5 for Next Hop.
d. Click Apply.