H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 196)

183
{
Set the link aggregation interface ID to 1.
{
Select the Dynamic (LACP Enabled) option for aggregate interface type.
{
Select GE1/0/1, GE1/0/2, and GE1/0/3 on the chassis front panel.
d. Click Apply.
Figure 164 Create dynamic link aggregation group 1
Configuration guidelines
When you configure a link aggregation group, follow these guidelines:
• In an aggregation group, the port to be a Selected port must be the same as the reference port in
port attributes, and class-two configurations. To keep these configurations consistent, you should
configure the port manually.