H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 448)

435
Figure 423 Create a policy
9. Configure classifier-behavior associations for the policy.
a. Click the Setup tab.
b. On the page as shown in Figure 424 , select policy1, select class1 in the Classifier Name list,
and select behavior1 in the Behavior Name list.
c. Click Apply.
Figure 424 Configure classifier-behavior associations for the policy
10. Apply the QoS policy in the inbound direction of GigabitEthernet 1/0/1.
a. Select QoS > Port Policy from the navigation tree.
b. Click the Setup tab.
c. Select policy1 in the Please select a policy list.
d. Select Inbound in the Direction list.