H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 455
Advertising
442
Figure 430 Configuring the PoE ports supplying power to the IP telephones
2.
Enable PoE on GigabitEthernet 1/0/11 and configure the maximum power of the port as 9000
milliwatts.
a.
Click the Setup tab.
b.
On the page that appears, select port GigabitEthernet 1/0/11 from the chassis front panel,
select Enable from the Power State list, select the box before Power Max and enter 9000, and
click Apply.
Advertising