H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 28)

15
Function menu Description User level
Global Set global MSTP parameters. Configure
Port Summary Display the MSTP information of ports. Monitor
Port Setup Set MSTP parameters on ports. Configure
Link
Aggregat
ion
Summary
Display information about aggregated interface, and
information about member ports.
Monitor
Create Create link aggregation groups. Configure
Modify Modify link aggregation groups. Configure
Remove Remove link aggregation groups. Configure
LACP
Summary
Display information about LACP-enabled ports and
their partner ports.
Monitor
Setup Set LACP priorities. Configure
LLDP
Port Setup
Display the LLDP configuration information, local
information, neighbor information, statistics
information, and status information of a port.
Monitor
Modify LLDP configuration on a port. Configure
Global Setup
Display global LLDP configuration information. Monitor
Configure global LLDP parameters. Configure
Global
Summary
Display global LLDP local information and statistics. Monitor
Neighbor
Summary
Display global LLDP neighbor information. Monitor
ARP
Manage
ment
ARP Table
Display ARP table information. Monitor
Add, modify, or delete an ARP entry. Configure
Gratuitous
ARP
Display configuration information of gratuitous ARP. Monitor
Configure gratuitous ARP. Configure
ARP
Anti-Attac
k
ARP Detection
Display the configuration information of ARP
detection.
Monitor
Configure ARP detection. Configure
IGMP
Snooping
Basic
Display global IGMP snooping configuration
information or the IGMP snooping configuration
information in a VLAN, and view the IGMP snooping
multicast entry information.
Monitor
Configure IGMP snooping globally or in a VLAN. Configure
Advanced
Display the IGMP snooping configuration information
on a port.
Monitor
Configure IGMP snooping on a port. Configure
IPv4
Routing
Summary Display the IPv4 active route table. Monitor
Create Create an IPv4 static route. Configure
Remove Delete the selected IPv4 static routes. Configure