H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 370)

357
Figure 350 Configure the RADIUS authentication server
c. To configure the primary accounting server, select the server type Accounting Server, enter the
IP address 10.110.91.146, enter the UDP port number 1813, select the state active, and click
Apply.
Figure 351 Configure the RADIUS accounting server
d. To configure RADIUS communication parameters, click the RADIUS Setup tab and do the
following:
{
Select the server type extended.
{
Select the Authentication Server Shared Key box and enter the shared key expert.
{
Enter expert again in the Confirm Authentication Shared Key box.
{
Select the Accounting Server Shared Key box and enter the shared key expert.
{
Enter expert again in the Confirm Accounting Shared Key box.
{
Select the username format without-domain.
e. Click Apply.