H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 75)

62
Figure 47 The Modify Port tab
3. Configure ports for a mirroring group, as described in Table 14 .
4. Click Apply.
The configuration progress dialog box appears.
5. After the success notification appears, click Close.
Table 15 Configuration items
Item Description
Mirroring
Group ID
ID of the mirroring group to be configured
The available groups were created previously.
• Select a Local mirroring group ID to configure ports for the local mirroring group.
• Select a Remote Source mirroring group ID to configure ports for a remote source
mirroring group.
• Select a Remote Destination mirroring group ID to configure ports for a remote destination
mirroring group.