Modifying ports – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 139
126
Item Description
Modify Description
Modify the description string of the selected VLAN.
By default, the description string of a VLAN is its VLAN ID, such as VLAN 0001.
Select
membe
rship
type
Untagged
Set the member type of the port to be modified in the VLAN.
Select the Untagged, Tagged, or Not A Member option:
•
Untagged: Indicates that the port sends the traffic of the VLAN with the VLAN tag
removed.
•
Tagged: Indicates that the port sends the traffic of the VLAN without removing the
VLAN tag.
•
Not A Member: Removes the port from the VLAN.
Tagged
Not A
Member
Select ports to be
modified and
assigned to this VLAN
Select the ports to be modified in the selected VLAN.
Click the ports to be modified on the chassis front panel. You can select one or more
ports. If aggregate interfaces are configured on the device, the page displays a list of
aggregate interfaces below the chassis front panel. You can select aggregate
interfaces from this list.
IMPORTANT:
When you configure an access port as a tagged member of a VLAN, the link type of the
port is automatically changed into hybrid.
Modifying ports
1.
Select Network > VLAN from the navigation tree.
2.
Click Modify Port to enter the page for modifying ports, as shown in