H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 127)

114
Configuring the agent
1. Enable SNMP agent.
a. Select Device > SNMP from the navigation tree.
The Setup page appears.
Figure 101 Enable SNMP
b. Select the Enable option.
c. Select the v3 box.
d. Click Apply.
2. Configure an SNMP view.
a. Click the View tab.
b. Click Add.
The page for creating an SNMP view appears.
Figure 102 Create an SNMP view (1)
c. Enter view1 in the field.
d. Click Apply.