Configuring a rule for a basic ipv6 acl – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 419
406
Table 117 Configuration items
Item
Description
ACL Number
Enter a number for the IPv6 ACL.
Match Order
Select a match order for the ACL. Available values are:
•
Config: Packets are compared against ACL rules in the order the rules are configured.
•
Auto: Packets are compared against ACL rules in the depth-first match order.
Configuring a rule for a basic IPv6 ACL
1.
Select QoS > ACL IPv6 from the navigation tree
2.
Click the Basic Setup tab to enter the rule configuration page for a basic IPv6 ACL, as shown
in
Figure 399 The page for configuring a rule for a basic IPv6 ACL
3.
Configure the basic IPv6 ACL rule information.
4.
Click Add.
Table 118 Configuration items
Item
Description
Select Access Control List (ACL) Select the basic IPv6 ACL for which you want to configure rules.