H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 189)

176
Step Remarks
3. Setting LACP priority
Optional
Perform the task to set LACP priority for the local system and link aggregation
member ports.
Changes of LACP priorities affect the Selected/Unselected state of link
aggregation member ports.
The default port LACP priority and system LACP priority are both 32768.
4. Displaying information
of LACP-enabled ports
Optional
Perform the task to view detailed information of LACP-enabled ports and the
corresponding remote (partner) ports.
Creating a link aggregation group
1. Select Network > Link Aggregation from the navigation tree.
2. Click the Create tab to enter the page as shown in Figure 158 .
Figure 158 Create a link aggregation group