Setting buffer capacity and refresh interval – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 54
Advertising
41
Figure 31 Set loghost
3.
Set the log host as described in
.
4.
Click Apply.
Table 11 Configuration item
Item Description
IPv4/IPv6
Set the IPv4 or IPv6 address of the loghost and select the VPN instance name of the
VPN to which the flow logging server belongs. (You can specify a VPN instance
name only when you provide an IPv4 address.)
You can specify up to four loghosts.
Loghost IP
Setting buffer capacity and refresh interval
1.
Select Device > Syslog from the navigation tree.
2.
Click the Log Setup tab.
The syslog configuration page appears.
Advertising