H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 438)

425
Configuring priority mapping tables
1. Select QoS > Priority Mapping from the navigation tree.
The page shown in
Figure 411 appears.
Figure 411 The page for configuring priority mapping tables
2. Configure priority mapping tables.
3. Click Apply.
Table 130 Configuration items
Item Description
Mapping Type
Select the priority mapping table to be configured, which can be CoS to DSCP,
CoS to Queue, DSCP to CoS, DSCP to DSCP, or DSCP to Queue.
Input Priority Value
Set the output priority value for an input priority value.
Output Priority Value
Restore
Click Restore to display the default settings of the current priority mapping
table on the page.
To restore the priority mapping table to the default, click Apply.
Configuring priority trust mode on a port
1. Select QoS > Port Priority from the navigation tree to enter the page shown in Figure 412 .