Configuring lldp settings on ports in batch – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 203
190
Item Description
DOT1 TLV
Setting
Port VLAN ID
Select to include the PVID TLV in transmitted LLDPDUs.
Protocol VLAN
ID
Select to include port and protocol VLAN ID TLVs in transmitted LLDPDUs and
specify the VLAN IDs to be advertised.
If no VLAN is specified, the lowest protocol VLAN ID is transmitted.
VLAN Name
Select to include VLAN name TLVs in transmitted LLDPDUs and specify the
VLAN IDs to be advertised.
If no VLAN is specified, the lowest VLAN carried on the port is advertised.
DOT3 TLV
Setting
Link
Aggregation
Select to include the link aggregation TLV in transmitted LLDPDUs.
MAC/PHY
Configuration/S
tatus
Select to include the MAC/PHY configuration/status TLV in transmitted
LLDPDUs.
Maximum Frame
Size
Select to include the maximum frame size TLV in transmitted LLDPDUs.
Power via MDI
Select to include the power via MDI TLV in transmitted LLDPDUs.
MED TLV
Setting
LLDP-MED
Capabilities
Select to include the LLDP-MED capabilities TLV in transmitted LLDPDUs.
Inventory
Select to include the hardware revision TLV, firmware revision TLV, software
revision TLV, serial number TLV, manufacturer name TLV, model name TLV and
asset ID TLV in transmitted LLDPDUs.
Network Policy
Select to include the network policy TLV in transmitted LLDPDUs.
Extended
Power-via-MDI
Capability
Select to include the extended power-via-MDI TLV in transmitted LLDPDUs.
Emergency
Number
Select to encode the emergency call number in the location identification TLV
in transmitted LLDPDUs and set the emergency call number.
Address
Select Address to encode the civic address information of the network
connectivity device in the location identification TLV in transmitted LLDPDUs. In
addition, set the device type, which can be a DHCP server, switch or
LLDP-MED endpoint, country code, and network device address.
When you configure the network device address, select the address
information type from the list, enter the address information in the field below
and click Add next to the field to add the information to the address
information list below. To remove an address information entry, select the entry
from the list, and click Delete. The civic address information can include
language, province/state, country, city, street, house number, name,
postal/zip code, room number, post office box, and if necessary, additional
information.
Network Device
Address
Configuring LLDP settings on ports in batch
1.
Select Network > LLDP from the navigation tree to enter the Port Setup tab, as shown in
.
2.
Select one or more ports.
3.
Click Modify Selected. The page shown in
appears.