Dhcp server configuration examples, Static ip address assignment configuration example, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 278: Configuration procedure
Advertising
265
DHCP server configuration examples
DHCP networking involves two types:
•
The DHCP server and clients are on the same subnet.
•
The DHCP server and clients are not on the same subnet and communicate with each other through
a DHCP relay agent.
The DHCP server configuration for the two types is the same.
Static IP address assignment configuration example
Network requirements
As shown in
, configure Switch A (DHCP server) to assign Switch B (DHCP client) a static IP
address, DNS server address, and gateway address.
Figure 237 Network diagram
Configuration procedure
1.
Enable DHCP:
a.
Select Network > DHCP > DHCP Server from the navigation tree to enter the DHCP Server page
as shown in
.
b.
Select Enable for DHCP Service.
Advertising