H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 129)

116
Figure 105 Create an SNMP group
c. Enter group1 in the field of Group Name, select view1 from the Read View box, and select
view1 from the Write View box.
d. Click Apply.
4. Configure an SNMP user
a. Click the User tab.
b. Click Add.
The page in
Figure 106 appears.
c. Enter user1 in the field of User Name, select Auth/Priv from the Security Level list, select
group1 from the Group Name list, select MD5 from the Authentication Mode list, enter authkey
in the Authentication Password and Confirm Authentication Password fields, select DES56
from the Privacy Mode list, enter prikey in the Privacy Password and Confirm Privacy
Password fields.
d. Click Apply.