H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 78
65
b.
Select 1 – Local from the Mirroring Group ID list.
c.
Select Mirror Port from the Port Type list.
d.
Select both from the Stream Orientation list.
e.
Select GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 on the chassis front panel.
f.
Click Apply.
A configuration progress dialog box appears.
g.
After the success notification appears, click Close.
Figure 50 Configure the mirroring ports
3.
Configure the monitor port:
a.
Click Modify Port to enter the page for configuring ports for the mirroring group, as shown
in
.
b.
Select 1 – Local from the Mirroring Group ID list.
c.
Select Monitor Port from the Port Type list.
d.
Select GigabitEthernet 1/0/3 on the chassis front panel.
e.
Click Apply.
A configuration progress dialog box appears.
f.
After the success notification appears, click Close.