Configuring switch c, Configuring switch d – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 185
172
b.
Click the Global tab.
c.
To configure MSTP globally:
{
Select Enable from the Enable STP Globally list.
{
Select MSTP from the Mode list.
{
Select the Instance option.
{
Set the Instance ID field to 2.
{
Set the Root Type field to Primary.
d.
Click Apply.
Configuring Switch C
1.
Configure an MST region. (The procedure here is the same as that of configuring an MST region
on Switch A.)
2.
Configure MSTP globally:
a.
Select Network > MSTP from the navigation tree.
b.
Click the Global tab.
c.
To configure MSTP globally:
{
Select Enable from the Enable STP Globally list.
{
Select MSTP from the Mode list.
{
Select the Instance option.
{
Set the Instance ID field to 3.
{
Set the Root Type field to Primary.
d.
Click Apply.
Configuring Switch D
1.
Configure an MST region. The procedure is the same as that of configuring an MST region on
Switch A.
2.
Configure MSTP globally:
a.
Select Network > MSTP from the navigation tree.
b.
Click the Global tab.
c.
Select Enable from the Enable STP Globally list, and select MSTP from the Mode list.
d.
Click Apply.