H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 192)

179
Figure 160 The Setup tab
3. Modify the LACP priority in the Select LACP enabled port(s) parameters field as described in Table
58 .
4. Click Apply.
Table 58 Configuration items
Item Description
Port Priority Set a port LACP priority.
Select port(s) to apply Port
Priority
Select the ports where the port LACP priority you set will apply on the chassis
front panel.
(You can set LACP priority not only on LACP-enabled ports but also on
LACP-disabled ports.)
System Priority Set the LACP priority of the local system.
Displaying information of LACP-enabled ports
1. Select Network > LACP from the navigation tree.
The Summary tab is displayed by default, as shown in
Figure 161 . The upper part of the page
displays a list of all LACP-enabled ports on the device and information about them.
2. Select an entry.
3. Click View Details to display detailed information about the peer port on the lower part of the
page.