Authorized ip configuration example, Network requirements, Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 405: Thorized ip as described in, Table 110
392
Table 110 Configuration items
Item Description
Telnet
IPv4 ACL
Associate the Telnet service with an IPv4 ACL.
You can configure the IPv4 ACL to be selected by selecting QoS > ACL IPv4.
IPv6 ACL
Associate the Telnet service with an IPv6 ACL.
You can configure the IPv6 ACL to be selected by selecting QoS > ACL IPv6.
Web
(HTTP)
IPv4 ACL
Associate the HTTP service with an IPv4 ACL.
You can configure the IPv4 ACL to be selected by selecting QoS > ACL IPv4.
Authorized IP configuration example
Network requirements
In
, configure Switch to deny telnet and HTTP requests from Host A , while permit telnet and
HTTP requests from Host B.
Figure 389 Network diagram
Configuration procedure
1.
Create an ACL:
a.
Select QoS > ACL IPv4 from the navigation tree.
b.
Click the Create tab.
c.
Type 2001 for ACL Number, as shown in
d.
Click Apply.