Device basic information configuration, Overview, Configuring system name – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 42: Configuring idle timeout period, Chapter, Device basic information, Configuration, Apter
29
Device basic information configuration
Overview
The device basic information feature provides the following functions:
•
Set the system name of the device. The configured system name is displayed on the top of the
navigation bar.
•
Set the idle timeout period for logged-in users. When a logged-in user is idle for that period, the
system logs the user out of the system for security purpose.
Configuring system name
1.
Select Device > Basic from the navigation tree.
The page for configuring system name configuration appears.
Figure 19 Configure system name
2.
Enter the system name.
3.
Click Apply.
Configuring idle timeout period
1.
Select Device > Basic from the navigation tree.
2.
Click the Web Idle Timeout tab.
The page for configuring idle timeout period appears.