H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 269)

256
Figure 228 Configure a DHCP server interface
Display the information of assigned IP addresses
1. Select Network > DHCP to enter the default DHCP Server page shown in Figure 225 .
2. In the Address In Use area, view the information about the IP address assigned from the address
pool.
Table 78 Field description
Field Description
IP Address Assigned IP address
Client MAC Address/Client ID Client MAC address or client ID bound to the IP address
Pool Name Name of the DHCP address pool where the IP address belongs
Lease Expiration Lease time of the IP address
Configuring the DHCP relay agent
Recommended configuration procedure
Step Remarks
1. Enabling DHCP and
configuring
advanced
parameters for the
DHCP relay agent
Required
Enable DHCP globally and configure advanced DHCP parameters.
By default, global DHCP is disabled.
2. Creating a DHCP
server group
Required
To improve reliability, you can specify several DHCP servers as a group on the
DHCP relay agent and correlate a relay agent interface with the server group.
When the interface receives requesting messages from clients, the relay agent will
forward them to all the DHCP servers of the group.