H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 365)

352
Step Description
3. Configuring
RADIUS
parameters
Required
Configure the parameters that are necessary for information exchange between the
device and RADIUS servers.
Configuring RADIUS servers
1. Select Authentication > RADIUS from the navigation tree to enter the RADIUS server configuration
page.
Figure 347 RADIUS server configuration
2. Configure RADIUS servers as described in Table 98 .
3. Click Apply.
Table 98 Configuration items
Item Description
Server Type
Specify the type of the server to be configured, which can be Authentication
Server and Accounting Sever.
Primary Server IP
Specify the IP address of the primary server.
If no primary server is specified, the box displays 0.0.0.0.
To remove the previously configured primary server, enter 0.0.0.0 in the box.
The specified IP address of the primary server cannot be the same as that of the
secondary server.
Primary Server UDP Port
Specify the UDP port of the primary server.
If the IP address of the primary server is not specified or the specified IP address
is to be removed, the port number is 1812 for authentication or 1813 for
accounting.