Creating an ipv6 acl – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 418

Advertising
background image

405

Item

Description

MAC
Address

Filter

Source MAC
Address

Select the Source MAC Address option and enter a source MAC address
and a mask.

Source Mask

Destination MAC
Address

Select the Destination MAC Address option and enter a destination MAC
address and a mask.

Destination Mask

COS(802.1p priority)

Specify the 802.1p priority for the rule.

Type Filter

LSAP Type

Select the LSAP Type option and specify the DSAP and SSAP fields in the LLC
encapsulation by configuring the following items:

LSAP Type: Indicates the frame encapsulation format.

LSAP Mask: Indicates the LSAP mask.

LSAP Mask

Protocol Type

Select the Protocol Type option and specify the link layer protocol type by
configuring the following items:

Protocol Type: Indicates the frame type. It corresponds to the type-code

field of Ethernet_II and Ethernet_SNAP frames.

Protocol Mask: Indicates the protocol mask.

Protocol Mask

Time Range

Select the time range during which the rule takes effect.

Creating an IPv6 ACL

1.

Select QoS > ACL IPv6 from the navigation tree.

2.

Click the Create tab to enter the IPv6 ACL creating page, as shown in

Figure 398

.

Figure 398 The page for creating an IPv6 ACL

3.

Configure the IPv6 ACL information.

4.

Click Apply.

Advertising