H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 402)

389
Figure 385 Add a port isolation group
2. Assign GigabitEthernet 1/0/2, GigabitEthernet 1/0/3, and GigabitEthernet 1/0/4 to port
isolation group 1:
a. Click the Port Setup tab to enter the page shown in Figure 386 .
b. Select 1 from the Isolate group ID list.
c. Select Isolated port for Config Type.
d. Select GigabitEthernet 1/0/2, GigabitEthernet 1/0/3, and GigabitEthernet 1/0/4 on the
chassis front panel.
e. Click Apply.
A configuration progress dialog box appears.
f. After the success notification appears, click Close.