PLANET XGS3-24042 - Manual (Page 103)

XGS3 Command Guide
1-103
Default:
TFTP server is not started by default.
Command mode:
Global Mode
Usage Guide:
When TFTP server function is enabled, the switch can still perform tftp client functions. TFTP server is not started by
default.
Example:
Enable TFTP server service.
Switch#config
Switch(config)#tftp-server enable
Relative Command:
tftp-server timeout
1.5.10 tftp-server retransmission-number
Command:
tftp-server retransmission-number <number>
Function:
Set the retransmission time for TFTP server.
Parameter:
<number> is the time to re-transfer, the valid range is 1 to 20.
Default:
The default value is 5 retransmission.
Command mode:
Global Mode
Example:
Modify the retransmission to 10 times.
Switch#config
Switch(config)#tftp-server retransmission-number 10
1.5.11 tftp-server transmission-timeout
Command:
tftp-server transmission-timeout <seconds>
Function:
Set the transmission timeout value for TFTP server.