PLANET XGS3-24042 - Manual (Page 765)

44-40
Usage Guide:
Display PIM interface information
Example:
testS2(config)#show ip pim interface
Address Interface VIFindex Ver/ Nbr DR DR
Mode Count Prior
10.1.4.3 Vlan1 0 v2/S 1 1 10.1.4.3
10.1.7.1 Vlan2 2 v2/S 0 1 10.1.7.1
Displayed Information Explanations
Address Interface address
Interface Interface name
VIF index Interface index
Ver/Mode Pim version and mode,usually v2,sparse mode
displays S,dense mode displays D
Nbr Count The interface’s neighbor count
DR Prior Dr priority
DR The interface’s DR address
44.3.35 show ip pim mroute sparse-mode
Command:
show ip pim mroute sparse-mode [group <A.B.C.D>] [source <A.B.C.D>]
Function:
Display the multicast route table of PIM-SM.
Parameter:
group <A.B.C.D>: Display redistributed items that related to this multicast address
source <A.B.C.D>: Display redistributed items that related to this source
Command Mode:
Admin Mode and Global Mode
Usage Guide:
Display the BSP routers in the network maintained by PIM-SM.
Example:
Switch #show ip pim mroute sparse-mode
IP Multicast Routing Table
(*,*,RP) Entries: 0