PLANET XGS3-24042 - Manual (Page 936)

47-2
with one multicast VLAN and the association will only succeed when every VLAN listed in the VLAN
ID table exists.
Command Mode:
VLAN Mode.
Default:
The multicast VLAN is not associated with any VLAN by default.
Usage Guide:
After a VLAN is associated with the multicast VLAN, when there comes the multicast order in the
port of this VLAN, then the multicast data will be sent from the multicast VLAN to this port, so to
reduce the data traffic. The VLAN associated with the multicast VLAN should not be a Private VLAN.
A VLAN can only be associated with another VLAN after the multicast VLAN is enabled. Only one
multicast VLAN can be enabled on a switch.
Examples:
Switch(config)#vlan 2
Switch(Config-Vlan2)# multicast-vlan association 3, 4
Example:
Chapter 47 Commands for ACL
47.1 absolute-periodic/periodic
Command:
[no] absolute-periodic {Monday|Tuesday|Wednesday|Thursday|Friday
|Saturday|Sunday}<start_time>to{Monday|Tuesday|Wednesday|Thursday|Friday|Saturday|
Sunday} <end_time>
[no]periodic{{Monday+Tuesday+Wednesday+Thursday+Friday+Saturday+Sunday}|daily|
weekdays | weekend} <start_time> to <end_time>
Functions:
Define the time-range of different commands within one week, and every week to circulate subject
to this time.
Parameters:
Friday （Friday)