PLANET XGS3-24042 - Manual (Page 816)

44-91
Example:
switch(config)# multicast destination-control
44.8.10 show ip multicast destination-control
Command:
show ip multicast destination-control [detail]
show ip multicast destination-control interface <Interfacename> [detail]
show ip multicast destination-control host-address <ipaddress> [detail]
show ip multicast destination-control <vlan-id> <mac-address> [detail]
Function:
Display multicast destination control
Parameter:
detail: expresses if it display information in detail or not..
<Interfacename>: interface name or interface aggregation name, such as Ethernet , port-channel 1
or ethernet .
Command Mode:
Admin Mode and Global Mode
Usage Guide:
The command displays multicast destination control rules of configuration, including detail option,
and access-list information applied in detail.
Example:
Switch (config)#show ip multicast destination-control
ip multicast destination-control is enabled
ip multicast destination-control 11.0.0.0/8 access-group 6003
ip multicast destination-control 1 00-03-05-07-09-11 access-group 6001
multicast destination-control access-group 6000 used on interface Ethernet
switch(config)#
44.8.11 show ip multicast destination-control
access-list
Command:
show ip multicast destination-control access-list
show ip multicast destination-control access-list <6000-7999>